Raspberry Pi Camera Cable

Works great just carefully open the connector on the pi and slip this one in this cable is.

Raspberry pi camera cable. The pi zero w camera socket uses a different width of cable to the main raspberry pi boards. You need to get the cable the right way round or the camera will not work. Install the raspberry pi camera module by inserting the cable into the raspberry pi camera port. To do so we pull the black connector downwards as shown in the picture below.

The camera board attaches to the raspberry pi via a 15 way ribbon cable. The standard camera module is green. They are installed and work in the same way. 1648 this cable will let you swap out the stock 150mm long flex cable from a raspberry pi camera either classic or noir type or raspberry pi display for a different size.

Adafruit industries unique fun diy electronics and kits flex cable for raspberry pi camera or display 300mm 12 id. The camera and the pi board have similar sockets for the cable. You can buy the cable separately or get it with the official pi zero case. Hence we will need to remove the flex cable from the camera module.

The cable slots into the connector situated between the usb and micro hdmi ports with the silver connectors facing the micro hdmi ports. Connecting the camera on a pi zero w. The camera module comes with a flex cable that will not fit into the csi camera connector on the raspberry pi zero w. There are only two connections to make.

Works great just carefully open the connector on the pi and slip this one in this cable is 24. The ribbon cable needs to be attached to the camera pcb and to the raspberry pi itself.